A Thorough Review of the PeniMaster Penis Extender by Masa

Review by Masa Ching

So What Exactly is the PeniMaster Pro?

Who, what, when, and where does this device come from?

Did you know? It is distributed and manufactured from Berlin, Germany.

The PeniMaster Pro is actually a penis extender that utilizes both a vacuum and rod design to help keep the penis an the standard “traction state” to trigger cell hyperplasia and permanently increase length.

These are the steps to put on the PeniMaster Penis Extender

Unfortunately, the Penimaster is a pretty device that is complicated use.

That is that it takes to put on because it is produced out of many parts and has many actions.

Let’s understand how to put it on by using the proper parts described above.

  1. Apply the adhesion gel to the part that is actually inner of bulb.
  2. Fasten the hose to the the surface of the bulb.
  3. Stick the general head of your penis inside the bulb.
  4. Insert the sealing plug on the hose.
  5. Fasten the base part round the base of your penis shaft.
  6. Adjust the rods or install the correct rods to apply the tension that is right.
  7. Fix the bulb into the top of the rod frame.
  8. Angle the device.
  9. Or rather of using the frame that is rod-based just use the elastic belt instead.
  10. Day put your pants back on and continue together with your.


The simple fact is, most of the steps will simply take more than 30 seconds to accomplish while i laid out these steps.

This implies that it will take at minimum 2 minutes to put the device on properly. Can you do this every day? This even more time than it takes to brush your teeth every day.

The Full Experience: Wearing it on a Day-by-Day Basis

When I’m wearing it it feels pretty similar to the penis extender that is pro-extender.

It’s pretty comfortable when sitting – but when walking around it gets just a little less, but still manageable.

Then it feels just like the PhalloGauge Model S or the PhalloSan extenders if you wear it using the belt system rather of the rod-frame.

Generally, there is no pain and it gives a stretch that is great.

Some Pros of this Device

How does it work from a technical perspective?

The PeniMaster does it’s job from a purely functional perspective.

That is, it keeps your penis in the fully elongated position and there if your penis does tend to slip, it’s pretty rare.

And the aesthetics? How’s the design?

The parts which can be white really nice and tend to be definitely well made.

While most guys won’t care also much about the looks whether it stays on and works, it’s nonetheless a great touch because it will be under your pants and the primary concern is.

Some Serious Drawbacks of this Extender

The single biggest drawback (for me) is the need to use an adhesion gel with the light bulb.

For some this may become a offer killer.

(At least for me anyway, and I know I’m a lot like you other guys…)

Let me explain.

You need to take the gel everywhere you go and make every effort to bring it.

Since the adhesion serum is literally a requirement to make use of this penis extender, you must carry a tube of that gel everywhere you go and everywhere you might imagine on that is putting taking off the device.

Say you forget it one day when you go to work – well, when this occurs, you’ve quite much lost out for a whole day’s penis extender usage – and we all know how time that is much takes to get results.

I mean you could go home and fetch the gel, but for some to go mostly the real way home and back to work/play/meeting/etc. it’s pretty much not possible.

Also, the usage that is gel adds on time that it requires to put on the penis stretcher.

You have to squirt it in the bulb, rub it around with your finger, close the tube that is gel then finally fit your penis tip in to the light bulb.

Each time to do these measures – even more when I was in an inconvenient environement on avergae, it took myself about 2 minutes.

You also have to wash your finger when you’re done applying the gel.

Or, you can wipe it on your pants – but, i favor to keep my clothes clean.

Why is usability absolutely critical to me, Masa?

Because it matters.

It’s the difference between results and failure.

If the device is not user-friendly, it becomes a hassle to simply use and you shelf it. The end result? No gains and wasted cash.

The way that is only solve this problem is to ensure it is so easy for the user to use that there’s literally no excuse not to make use of it.

Because there are many parts – there is more risk for device malfunction and breakage.

The PeniMaster is a penis extender that is fairly complex.

It comes with and some assembly is required when it arrives, there are many components that.

Not merely, that but there are threat of these right parts breaking or wearing overtime.

While this can cause troubles in the future, there are always options on their website to re-purchase replacement areas if the need arises.

These parts range from 6€ ($6.51 USD) to 69€ ($74.91 USD) depending on which part you buy. This does not consist of shipping, so expect that price to very little be described as a higher.

Being distributed and manufactured from Germany – this may pose problems on actually getting it in your hands!

This might be actually a pro for those that stay in Germany.

However, the majority of us – those probably reading this review – it is definitely a con.

There’s an extra covering of hassle that is actually associated with importing products to the United States (who pays the shipping, what parts of the shipping are covered {free on board, etc.}, making sure it will pass customs, extra price for shipping to a foreign country).

The same “dead-beaten horse”: The system that is rod-based has the same problem of bulging from the pants.

This con is not a nagging problem that is exclusive to the PeniMaster.

It’s a problem that is inherent and inescapable for all extenders that are rod-based point straight outwards.

While the angling does mitigate this dilemma, significantly, certain angles are uncomfortable to walk in, and restrict you to just sitting all the way down.

I might also mention that the number of sitting opportunities like your legs crossed for example) are impossible to do with rod-based extenders that you might have (like if you.

Try any “non-compliant” position and you’ll risk your knob slipping out of the extender.

A big struggle: Edemas on the glans

This really is an extremely risk that is actually real all penis extenders that use a bulb to try and create a vaccum seal around the penis glans (mushroom tip).

Then water starts to build up in certain areas of the glans creating a edema-like blister that looks like a bump full of fluid if the vacuum is too tight.

See all of our chapter in our penis stretcher guide to find out more about edemas.

Leave a Reply

Your email address will not be published. Required fields are marked *